# Effect Sizes for Simple Hypothesis Tests

This vignette provides a short review of effect sizes for common hypothesis tests (in R these are usually achieved with various *.test() functions).

library(effectsize)
library(BayesFactor)

In most cases, the effect sizes can be automagically extracted from the htest object via the effectsize() function.

# Standardized Differences

For t-tests, it is common to report an effect size representing a standardized difference between the two compared samples’ means. These measures range from $$-\infty$$ to $$+\infty$$, with negative values indicating the second group’s mean is larger (and vice versa).

## Two Independent Samples

For two independent samples, the difference between the means is standardized based on the pooled standard deviation of both samples (assumed to be equal in the population):

t.test(mpg ~ am, data = mtcars, var.equal = TRUE)
>
>   Two Sample t-test
>
> data:  mpg by am
> t = -4, df = 30, p-value = 3e-04
> alternative hypothesis: true difference in means between group 0 and group 1 is not equal to 0
> 95 percent confidence interval:
>  -10.85  -3.64
> sample estimates:
> mean in group 0 mean in group 1
>            17.1            24.4
cohens_d(mpg ~ am, data = mtcars)
> Cohen's d |         95% CI
> --------------------------
> -1.48     | [-2.27, -0.67]
>
> - Estimated using pooled SD.

Hedges’ g provides a bias correction for small sample sizes ($$N < 20$$).

hedges_g(mpg ~ am, data = mtcars)
> Hedges' g |         95% CI
> --------------------------
> -1.44     | [-2.21, -0.65]
>
> - Estimated using pooled SD.

If variances cannot be assumed to be equal, it is possible to get estimates that are not based on the pooled standard deviation:

t.test(mpg ~ am, data = mtcars, var.equal = FALSE)
>
>   Welch Two Sample t-test
>
> data:  mpg by am
> t = -4, df = 18, p-value = 0.001
> alternative hypothesis: true difference in means between group 0 and group 1 is not equal to 0
> 95 percent confidence interval:
>  -11.28  -3.21
> sample estimates:
> mean in group 0 mean in group 1
>            17.1            24.4
cohens_d(mpg ~ am, data = mtcars, pooled_sd = FALSE)
> Cohen's d |         95% CI
> --------------------------
> -1.41     | [-2.26, -0.53]
>
> - Estimated using un-pooled SD.
hedges_g(mpg ~ am, data = mtcars, pooled_sd = FALSE)
> Hedges' g |         95% CI
> --------------------------
> -1.35     | [-2.17, -0.51]
>
> - Estimated using un-pooled SD.

In cases where the differences between the variances are substantial, it is also common to standardize the difference based only on the standard deviation of one of the groups (usually the “control” group); this effect size is known as Glass’ $$\Delta$$ (delta) (Note that the standard deviation is taken from the second sample).

glass_delta(mpg ~ am, data = mtcars)
> Glass' delta |         95% CI
> -----------------------------
> -1.17        | [-1.93, -0.39]

For a one-sided hypothesis, it is also possible to construct one-sided confidence intervals:

t.test(mpg ~ am, data = mtcars, var.equal = TRUE, alternative = "less")
>
>   Two Sample t-test
>
> data:  mpg by am
> t = -4, df = 30, p-value = 1e-04
> alternative hypothesis: true difference in means between group 0 and group 1 is less than 0
> 95 percent confidence interval:
>   -Inf -4.25
> sample estimates:
> mean in group 0 mean in group 1
>            17.1            24.4
cohens_d(mpg ~ am, data = mtcars, pooled_sd = TRUE, alternative = "less")
> Cohen's d |        95% CI
> -------------------------
> -1.48     | [-Inf, -0.80]
>
> - Estimated using pooled SD.
> - One-sided CIs: lower bound fixed at (-Inf).

## One Sample and Paired Samples

In the case of a one-sample test, the effect size represents the standardized distance of the mean of the sample from the null value. For paired-samples, the difference between the paired samples is used:

t.test(extra ~ group, data = sleep, paired = TRUE)
>
>   Paired t-test
>
> data:  extra by group
> t = -4, df = 9, p-value = 0.003
> alternative hypothesis: true difference in means is not equal to 0
> 95 percent confidence interval:
>  -2.46 -0.70
> sample estimates:
> mean of the differences
>                   -1.58
cohens_d(extra ~ group, data = sleep, paired = TRUE)
> Cohen's d |         95% CI
> --------------------------
> -1.28     | [-2.23, -0.44]
hedges_g(extra ~ group, data = sleep, paired = TRUE)
> Hedges' g |         95% CI
> --------------------------
> -1.17     | [-2.04, -0.40]

## For a Bayesian t-test

(BFt <- ttestBF(mtcars$mpg[mtcars$am == 0], mtcars$mpg[mtcars$am == 1]))
> Bayes factor analysis
> --------------
> [1] Alt., r=0.707 : 86.6 ±0%
>
> Against denominator:
>   Null, mu1-mu2 = 0
> ---
> Bayes factor type: BFindepSample, JZS
effectsize(BFt, test = NULL)
> Summary of Posterior Distribution
>
> Parameter | Median |         95% CI
> -----------------------------------
> Cohens_d  |  -1.29 | [-2.09, -0.51]

# One way ANOVA

For more details, see ANOVA vignette.

onew <- oneway.test(mpg ~ gear, data = mtcars, var.equal = TRUE)

eta_squared(onew)
> # Effect Size for ANOVA
>
> Eta2 |       95% CI
> -------------------
> 0.43 | [0.18, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).

# Contingency Tables and Proportions

For contingency tables Cramér’s V, $$\phi$$ (Phi, also known as Cohen’s w) and Pearson’s contingency coefficient indicate the strength of association with 0 indicating no association between the variables. While Cramér’s V and Pearson’s C are capped at 1 (perfect association), $$\phi$$ can be larger than 1.

(Music <- matrix(
c(
150, 130, 35, 55,
100, 50, 10, 40,
165, 65, 2, 25
),
byrow = TRUE, nrow = 3,
dimnames = list(
Study = c("Psych", "Econ", "Law"),
Music = c("Pop", "Rock", "Jazz", "Classic")
)
))
>        Music
> Study   Pop Rock Jazz Classic
>   Psych 150  130   35      55
>   Econ  100   50   10      40
>   Law   165   65    2      25
chisq.test(Music)
>
>   Pearson's Chi-squared test
>
> data:  Music
> X-squared = 52, df = 6, p-value = 2e-09
cramers_v(Music)
> Cramer's V |       95% CI
> -------------------------
> 0.18       | [0.13, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).
phi(Music)
> Phi  |       95% CI
> -------------------
> 0.25 | [0.18, 1.41]
>
> - One-sided CIs: upper bound fixed at (1.4142135623731).
pearsons_c(Music)
> Pearson's C |       95% CI
> --------------------------
> 0.24        | [0.18, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).

Pearson’s C and $$\phi$$ are also applicable to tests of goodness-of-fit, where small values indicate no deviation from the hypothetical probabilities and large values indicate… large deviation from the hypothetical probabilities.

O <- c(89,  37,  130, 28,  2) # observed group sizes
E <- c(.40, .20, .20, .15, .05) # expected group freq

chisq.test(O, p = E, rescale.p = TRUE)
>
>   Chi-squared test for given probabilities
>
> data:  O
> X-squared = 121, df = 4, p-value <2e-16
pearsons_c(O, p = E, rescale.p = TRUE)
> Pearson's C |       95% CI
> --------------------------
> 0.55        | [0.48, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).
phi(O, p = E, rescale.p = TRUE)
> Phi  |           95% CI
> -----------------------
> 0.65 | [0.54,      Inf]
>
> - One-sided CIs: upper bound fixed at (Inf).

These can also be extracted from the equivalent Bayesian test:

(BFX <- contingencyTableBF(Music, sampleType = "jointMulti"))
> Bayes factor analysis
> --------------
> [1] Non-indep. (a=1) : 10053377 ±0%
>
> Against denominator:
>   Null, independence, a = 1
> ---
> Bayes factor type: BFcontingencyTable, joint multinomial
effectsize(BFX, type = "cramers_v", test = NULL)
> Summary of Posterior Distribution
>
> Parameter | Median |       95% CI
> ---------------------------------
> Cramers_v |   0.18 | [0.14, 0.22]
effectsize(BFX, type = "phi", test = NULL)
> Summary of Posterior Distribution
>
> Parameter | Median |       95% CI
> ---------------------------------
> phi       |   0.26 | [0.19, 0.31]
effectsize(BFX, type = "pearsons_c", test = NULL)
> Summary of Posterior Distribution
>
> Parameter  | Median |       95% CI
> ----------------------------------
> pearsons_c |   0.25 | [0.19, 0.30]

## Comparing Two Proportions (2x2 tables)

For $$2\times 2$$ tables, in addition to Cramér’s V, $$\phi$$ and Pearson’s C, we can also compute the Odds-ratio (OR), where each column represents a different group. Values larger than 1 indicate that the odds are higher in the first group (and vice versa).

(RCT <- matrix(
c(
71, 30,
50, 100
),
nrow = 2, byrow = TRUE,
dimnames = list(
Diagnosis = c("Sick", "Recovered"),
Group = c("Treatment", "Control")
)
))
>            Group
> Diagnosis   Treatment Control
>   Sick             71      30
>   Recovered        50     100
chisq.test(RCT) # or fisher.test(RCT)
>
>   Pearson's Chi-squared test with Yates' continuity correction
>
> data:  RCT
> X-squared = 32, df = 1, p-value = 2e-08
oddsratio(RCT)
> Odds ratio |       95% CI
> -------------------------
> 4.73       | [2.74, 8.17]

We can also compute the Risk-ratio (RR), which is the ratio between the proportions of the two groups - a measure which some claim is more intuitive.

riskratio(RCT)
> Risk ratio |       95% CI
> -------------------------
> 2.54       | [1.87, 3.45]

Additionally, Cohen’s h can also be computed, which uses the arcsin transformation. Negative values indicate smaller proportion in the first group (and vice versa).

cohens_h(RCT)
> Cohen's h |       95% CI
> ------------------------
> 0.74      | [0.50, 0.99]

## Paired Contingency Tables

For dependent (paired) contingency tables, Cohen’s g represents the symmetry of the table, ranging between 0 (perfect symmetry) and 0.5 (perfect asymmetry).

(Performance <- matrix(
c(
794, 86,
150, 570
),
nrow = 2, byrow = TRUE,
dimnames = list(
"1st Survey" = c("Approve", "Disapprove"),
"2nd Survey" = c("Approve", "Disapprove")
)
))
>             2nd Survey
> 1st Survey   Approve Disapprove
>   Approve        794         86
>   Disapprove     150        570
mcnemar.test(Performance)
>
>   McNemar's Chi-squared test with continuity correction
>
> data:  Performance
> McNemar's chi-squared = 17, df = 1, p-value = 4e-05
cohens_g(Performance)
> Cohen's g |       95% CI
> ------------------------
> 0.14      | [0.07, 0.19]

# Rank Based tests

Rank based tests get rank based effect sizes!

## Difference in Ranks

For two independent samples, the rank-biserial correlation ($$r_{rb}$$) is a measure of relative superiority - i.e., larger values indicate a higher probability of a randomly selected observation from X being larger than randomly selected observation from Y. A value of $$(-1)$$ indicates that all observations in the second group are larger than the first, and a value of $$(+1)$$ indicates that all observations in the first group are larger than the second.

A <- c(48, 48, 77, 86, 85, 85)
B <- c(14, 34, 34, 77)

wilcox.test(A, B) # aka Mann–Whitney U test
>
>   Wilcoxon rank sum test with continuity correction
>
> data:  A and B
> W = 22, p-value = 0.05
> alternative hypothesis: true location shift is not equal to 0
rank_biserial(A, B)
> r (rank biserial) |       95% CI
> --------------------------------
> 0.79              | [0.30, 0.95]

For one sample, $$r_{rb}$$ measures the symmetry around $$\mu$$ (mu; the null value), with 0 indicating perfect symmetry, $$(-1)$$ indicates that all observations fall below $$\mu$$, and $$(+1)$$ indicates that all observations fall above $$\mu$$. For paired samples the difference between the paired samples is used:

x <- c(1.15, 0.88, 0.90, 0.74, 1.21, 1.36, 0.89)

wilcox.test(x, mu = 1) # aka Signed-Rank test
>
>   Wilcoxon signed rank exact test
>
> data:  x
> V = 16, p-value = 0.8
> alternative hypothesis: true location is not equal to 1
rank_biserial(x, mu = 1)
> r (rank biserial) |        95% CI
> ---------------------------------
> 0.14              | [-0.59, 0.75]
>
> - Deviation from a difference of 1.
x <- c(1.83, 0.50, 1.62, 2.48, 1.68, 1.88, 1.55, 3.06, 1.30)
y <- c(0.878, 0.647, 0.598, 2.05, 1.06, 1.29, 1.06, 3.14, 1.29)

wilcox.test(x, y, paired = TRUE) # aka Signed-Rank test
>
>   Wilcoxon signed rank exact test
>
> data:  x and y
> V = 40, p-value = 0.04
> alternative hypothesis: true location shift is not equal to 0
rank_biserial(x, y, paired = TRUE)
> r (rank biserial) |       95% CI
> --------------------------------
> 0.78              | [0.30, 0.94]

## Rank One way ANOVA

The Rank-Epsilon-Squared ($$\varepsilon^2$$) is a measure of association for the rank based one-way ANOVA. Values range between 0 (no relative superiority between any of the groups) to 1 (complete separation - with no overlap in ranks between the groups).

group_data <- list(
g1 = c(2.9, 3.0, 2.5, 2.6, 3.2), # normal subjects
g2 = c(3.8, 2.7, 4.0, 2.4), # with obstructive airway disease
g3 = c(2.8, 3.4, 3.7, 2.2, 2.0) # with asbestosis
)

kruskal.test(group_data)
>
>   Kruskal-Wallis rank sum test
>
> data:  group_data
> Kruskal-Wallis chi-squared = 0.8, df = 2, p-value = 0.7
rank_epsilon_squared(group_data)
> Epsilon2 (rank) |       95% CI
> ------------------------------
> 0.06            | [0.01, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).

## Rank One way Repeated-Measures ANOVA

For a rank based repeated measures one-way ANOVA, Kendall’s W is a measure of agreement on the effect of condition between various “blocks” (the subjects), or more often conceptualized as a measure of reliability of the rating / scores of observations (or “groups”) between “raters” (“blocks”).

# Subjects are COLUMNS
(ReactionTimes <- matrix(
c(398, 338, 520,
325, 388, 555,
393, 363, 561,
367, 433, 470,
286, 492, 536,
362, 475, 496,
253, 334, 610),
nrow = 7, byrow = TRUE,
dimnames = list(
paste0("Subject", 1:7),
c("Congruent", "Neutral", "Incongruent")
)
))
>          Congruent Neutral Incongruent
> Subject1       398     338         520
> Subject2       325     388         555
> Subject3       393     363         561
> Subject4       367     433         470
> Subject5       286     492         536
> Subject6       362     475         496
> Subject7       253     334         610
friedman.test(ReactionTimes)
>
>   Friedman rank sum test
>
> data:  ReactionTimes
> Friedman chi-squared = 11, df = 2, p-value = 0.004
kendalls_w(ReactionTimes)
> Kendall's W |       95% CI
> --------------------------
> 0.80        | [0.76, 1.00]
>
> - One-sided CIs: upper bound fixed at (1).